Wednesday 29 September 2021

Theory - 2 . Safe Conduct (સલામત આચારણ )

 

The following recommendations detail the standard behavior for all personnel working within a laboratory.

  • Never adopt a casual attitude in the workshop and always be conscious of the potential hazards.
  • Ensure that personal clothing is suitable to the workshop conditions, e.g. Safety
  • footwear with steel capping. Thongs or open footwear should not be worn in the workshop area. Singlet’s, tank tops or similar clothing are not suitable for wearing in the workshop.
  • Always wear eye protection when using power operated hand or machine tools, or while performing physical tests that could lead to eye damage.
  • Use protective clothing and devices appropriate to the type of operation being carried out, giving due consideration to the work being carried out in the vicinity.
  • Never run in the workshop or any laboratory.
  • Never indulge in reckless behavior in the workshop
  • Always exercise care when opening and closing doors and entering or leaving the workshop.
  • Do not carry out any work in isolation in the workshop; ensure that at least a second person is within call.
  • Do not handle, store or consume food or drink in the workshop.
  • Do not store food or drink in a refrigerator, which is used to store workshop materials.

  • Do not smoke within any university building.
  • Regard all substances as hazardous unless there is definite information to the contrary.
  • Before any work is carried out in the workshop, permission must be obtained from the Workshop Supervisor. Never undertake any work unless the potential hazards of the operation are known as precisely as possible, and the appropriate safety precautions are adopted. Any flame producing activity is not to commence until the immediate area has been cleared of dusts. Many materials, which are nonflammable in a lump state, become quite volatile when in powdered or dust cloud form.
  • Take additional care when carrying or moving any potentially hazardous material or substance.
  • Warning signs and barriers are to be erected at entrances to the workshop before any testing is carried out when using materials of an excessively dusty nature, or are toxic or otherwise unpleasant.
  • Keep all fire-escape routes completely clear at all times. 
  • Label all safety equipment and maintain it in good operating condition. Check and inspect safety equipment for correct operation in accordance with the manufacturer’s instructions and report to workshop supervisor, any requirement for maintenance.
  • Ensure that all safety equipment remains accessible to the workshop personnel at all times.
  • Keep safety information and emergency procedures prominently displayed at all times in the workshop and each laboratory. Include in the safety information, the telephone numbers of:

i)                    Fire brigade.                       101.

ii)                   Ambulance.                        108.

iii)                 Safety officer.                     ______

iv)                 Hospital.                             _________ (Casualty)

v)                  Police. Emergency              _________

vi)                 First Aiders.                        _________        

FIRST AID BOX LOCATIONS. Coniston B

I)                    Workshop— on wall in north eastern corner

II)                  Workshop— on wall in center



નીચેની ભલામણો લેબોરેટરીમાં કામ કરતા તમામ કર્મચારીઓ /તાલીમાર્થીઓ માટે પ્રમાણભૂત વર્તનની વિગત આપે છે.

  • વર્કશોપમાં ક્યારેય આકસ્મિક વલણ ન અપનાવો અને સંભવિત જોખમો પ્રત્યે હંમેશા સભાન રહો.
  • ખાતરી કરો કે તાલીમાર્થીઓના કપડાં વર્કશોપની પરિસ્થિતિઓ માટે યોગ્ય છે, i.n. સલામતી
  • સ્ટીલ કેપિંગ સાથે ફૂટવેર. વર્કશોપ વિસ્તારમાં થોંગ્સ અથવા ખુલ્લા પગરખાં પહેરવા જોઈએ નહીં. વર્કશોપમાં પહેરવા માટે સિંગલેટ, ટેન્ક ટોપ્સ અથવા સમાન કપડાં યોગ્ય નથી.
  • પાવર સંચાલિત હાથ અથવા મશીન ટૂલ્સનો ઉપયોગ કરતી વખતે અથવા આંખને નુકસાન પહોંચાડી શકે તેવા શારીરિક પરીક્ષણો કરતી વખતે હંમેશા આઇપ્રોટેક્શન પહેરો.
  • ઓપરેશનના પ્રકારને અનુરૂપ રક્ષણાત્મક કપડાં અને ઉપકરણોનો ઉપયોગ કરો, જે નજીકમાં કરવામાં આવતા કામને યોગ્ય રીતે ધ્યાનમાં લે છે.
  • વર્કશોપ કે કોઈપણ લેબોરેટરીમાં ક્યારેય ન દોડો.
  • વર્કશોપમાં ક્યારેય અવિચારી વર્તણૂક ન કરો
  • દરવાજા ખોલવા અને બંધ કરતી વખતે અને વર્કશોપમાં પ્રવેશતી વખતે અથવા બહાર નીકળતી વખતે હંમેશા કાળજી રાખો.
  • વર્કશોપમાં અલગતામાં કોઈ કામ હાથ ધરશો નહીં; ખાતરી કરો કે ઓછામાં ઓછી બીજી વ્યક્તિ કોલની અંદર છે.
  • વર્કશોપમાં ખાવા -પીવાની વસ્તુઓનું સંચાલન, સંગ્રહ કે વપરાશ ન કરો.
  • રેફ્રિજરેટરમાં ખોરાક અથવા પીણું સંગ્રહિત કરશો નહીં, જેનો ઉપયોગ વર્કશોપ સામગ્રી સંગ્રહિત કરવા માટે થાય છે. 
  • સંસ્થાની કોઈપણ ઇમારતમાં ધૂમ્રપાન ન કરો.
  • બધા પદાર્થોને ખતરનાક માની લો સિવાય કે તેનાથી વિપરીત ચોક્કસ માહિતી ન હોય.
  • વર્કશોપમાં કોઈ પણ કાર્ય હાથ ધરવામાં આવે તે પહેલાં, વર્કશોપ સુપરવાઈઝર પાસેથી પરવાનગી મેળવવી આવશ્યક છે. જ્યાં સુધી ઓપરેશનના સંભવિત જોખમોને શક્ય તેટલી ચોક્કસપણે ઓળખવામાં ન આવે અને સલામતીની યોગ્ય સાવચેતી અપનાવવામાં ન આવે ત્યાં સુધી ક્યારેય કોઈ કામ હાથ ધરશો નહીં. કોઈપણ જ્યોત ઉત્પન્ન કરવાની પ્રવૃત્તિ જ્યાં સુધી તાત્કાલિક વિસ્તાર ધૂળથી સાફ ન થાય ત્યાં સુધી શરૂ થવાનો નથી. ઘણી સામગ્રી, જે ગઠ્ઠાની સ્થિતિમાં બિન -જ્વલનશીલ હોય છે, જ્યારે પાવડર અથવા ધૂળના વાદળના સ્વરૂપમાં તદ્દન અસ્થિર બને છે.
  • સંભવિત જોખમી સામગ્રી અથવા પદાર્થ વહન અથવા ખસેડતી વખતે વધારાની કાળજી લો.
  • અતિશય ધૂળવાળી પ્રકૃતિની સામગ્રીનો ઉપયોગ કરતી વખતે, અથવા ઝેરી અથવા અન્યથા અપ્રિય હોય ત્યારે કોઈપણ પરીક્ષણ હાથ ધરવામાં આવે તે પહેલાં વર્કશોપના પ્રવેશદ્વાર પર ચેતવણી ચિહ્નો અને અવરોધો ઉભા કરવા જોઈએ.
  • દરેક સમયે ફાયર-એસ્કેપ માર્ગો સંપૂર્ણપણે સાફ રાખો.
  • બધા સલામતી સાધનોને લેબલ કરો અને તેને સારી ઓપરેટિંગ સ્થિતિમાં જાળવો.
  • ઉત્પાદકની સૂચનાઓ અનુસાર યોગ્ય કામગીરી માટે સલામતી સાધનો તપાસો અને નિરીક્ષણ કરો અને વર્કશોપ સુપરવાઇઝરને જાણ કરો, જાળવણી માટેની કોઈપણ જરૂરિયાત.
  • ખાતરી કરો કે તમામ સલામતી સાધનો દરેક સમયે વર્કશોપ કર્મચારીઓ/તાલીમાર્થીઓ માટે સુલભ રહે છે.
  • કાર્યશાળા અને દરેક પ્રયોગશાળામાં સલામતીની માહિતી અને કટોકટીની પ્રક્રિયાઓ દરેક સમયે પ્રદર્શિત રાખો. સલામતી માહિતી, ના ટેલિફોન નંબરોમાં શામેલ કરો:

i)                    Fire brigade.                       101.

ii)                   Ambulance.                        108.

iii)                 Safety officer.                     ______

iv)                 Hospital.                             _________ (Casualty)

v)                  Police. Emergency              _________

vi)                 First Aiders.                        _________        

FIRST AID BOX LOCATIONS. Coniston B

I)                    Workshop— on wall in north eastern corner

II)                  Workshop— on wall in center

 


THEORY / Practical - 1 Visit the Institute and aware of infrastructure of Trade

 






હેતુ :- Practical - 1 Visit the Institute and aware of infrastructure  of Trade

સાધનો :- નોટબૂક ,
                પેન્સિલ ,
                રબર ,
                સ્કેલ. 

  • સૌ પ્રથમ તો સંસ્થા માં  આવીને જે કોર્ષ માં ઍડ્મિશન  મેળવેલ છે તે ટ્રેડ માં જઈને તેના થી માહિતગાર થાવો . જે તે સંબંધીત ઈન્સટ્રક્ટરશ્રી ની પાસેથી કોર્ષનાં સીલેબસની માહિતી મેળવો.

  • ટ્રેડમાં ઉપયોગમાં લેવાતી સાધન - સામગ્રીનું દુરથી નીરીક્ષણ કરો.

  • બાદમા, સુપરવાઈઝર ઈન્સટ્રક્ટરશ્રીની સુચનાં મુજબ જેતે ટ્રેડનો લેય- આઉટ બનાવો.

  • ત્યારબાદ સંસ્થાની ચાલતા અન્ય કોર્ષ, અન્ય વ્યવસ્થાથી માહિતગાર થવા દરેક ટ્રેડની  મુલાકાત લેવી .

  • દરેક ટ્રેડની મુલાકાત લેતા સમયે જે તે  ટ્રેડની  માહિતી એકઠી કરો જેમકે  ભવિષ્યમાં નોકરીની તકો, ઉચ્ચ અભ્યાસની સંભવિતતા વિગેરે.

  •  દરેક ટ્રેડની મુલાકાત લેતા સમયે જે તે  ટ્રેડમાં ઉપલબ્ધ તમામ સુપરવાઈઝર ઈન્સટ્રક્ટરશ્રીનાં સાથે પરીચય કેળવો તથા તેમનાં વિશે ટેકનીકલ માહિતી જાણવી.

  • સંસ્થામાં આવેલ વહિવટી માળખાકીય સુવીધાઓ જેવીકે પાણીની વ્યવસ્થા, સેનીટેશન, બાથરુમ-ટોઈલેટ, પ્રાથમીક સારવારની માહિતી લખી કે યાદ રાખવી.

  • સંસ્થામાં અન્ય આવશ્યક સુવીધા જેવીકે લાયબ્રેરી, પ્લેસમેન્ટ બ્યુરો, એપ્રેન્ટીશ શાખા, વહિવટી ઓફિસ શાખાની પણ જરુર મુલાકાત લેવી.


સાવચેતી  
  1.  સંસ્થામાં મુલાકાત સમયે  કોઈપણ મશીનરીને  અડકશો નહી.
  2.  સંસ્થામાં સ્વચ્છતા જાળવો
  3.  બાગ બગીચામાં ફુલ-છોડને તોડશો નહી.













Tuesday 28 September 2021

THEORY 9 Safety in Soldering ( સોલ્ડરિંગમાં સલામતી ),


 

The temperature of soldering irons can reach 800 F (Fahrenheit), so it is very important to know where your iron is at all times. When doing soldering, you use a soldering iron stand to prevent accidental damage.

સોલ્ડરિંગ આયર્નનું તાપમાન 800 એફ (ફેરનહીટ) સુધી પહોંચી શકે છે, તેથી તમારા આયર્ન દરેક સમયે ક્યાં છે તે જાણવું ખૂબ મહત્વપૂર્ણ છે. સોલ્ડરિંગ કરતી વખતે, તમે આકસ્મિક નુકસાનને રોકવા માટે સોલ્ડરિંગ આયર્ન સ્ટેન્ડનો ઉપયોગ કરી શકો  છો.

When solder is heated, fumes are released which are very dangerous to your eyes and lungs. It recommends using a fume extractor, a fan with a charcoal filter that absorbs harmful solder fumes.

જ્યારે સોલ્ડર ગરમ થાય છે, ત્યારે ધૂમાડો બહાર આવે છે જે તમારી આંખો અને ફેફસા માટે ખૂબ જોખમી છે. તેથી ફ્યુમ એક્સ્ટ્રેક્ટરનો ઉપયોગ કરવાની ભલામણ કરાય છે, ચારકોલ ફિલ્ટર સાથેનો ચાહક જે હાનિકારક સોલ્ડર ધૂમાડો શોષી લે છે.

You must wear the protective eyewear when doing soldering, to protect from an accidental splash of hot solder.

ગરમ સોલ્ડરના આકસ્મિક સ્પ્લેશથી બચાવવા માટે, સોલ્ડરિંગ કરતી વખતે તમારે રક્ષણાત્મક આંખના વસ્ત્રો પહેરવા જોઈએ.


THEORY 8 Soldering Tools (સોલ્ડરિંગ સાધનો)

 

Soldering Tools

Following are the tools used in soldering:

સોલ્ડરિંગમાં ઉપયોગમાં લેવાતા સાધનો નીચે મુજબ છે:

1.    Soldering iron  ( સોલ્ડરિંગ આયર્ન )
2.    Soldering station  ( સોલ્ડરિંગ સ્ટેશન )
3.    Iron tips  ( આયર્ન ટીપ્સ )
4.    Brass or conventional sponge  ( પિત્તળ અથવા પરંપરાગત સ્પોન્જ )
5.    Soldering iron stand  ( સોલ્ડરિંગ આયર્ન સ્ટેન્ડ )
6.    Solder  ( સોલ્ડર )
7.    Helping Hand  ( હેલ્પિંગ હેન્ડ)


Soldering Iron

Soldering iron is a hand tool used to heat solder, usually from an electrical power supply at high temperatures above the melting point of a metal alloy. It allows for the solder to flow between workpieces required for joining.

This soldering tool is made of an insulated handle and a heated pointed metal iron tip. Although soldering iron has engineering uses, it can be used in different connections.

સોલ્ડરિંગ આયર્ન

સોલ્ડરિંગ આયર્ન સોલ્ડર ગરમ કરવા માટે ઉપયોગમાં લેવાતું સાધન છે, સામાન્ય રીતે મેટલ એલોયના ગલનબિંદુથી ઉંચા તાપમાને ઇલેક્ટ્રિકલ પાવર સપ્લાયમાંથી તે સોલ્ડરને જોડાવા માટે જરૂરી કામના ટુકડાઓ વચ્ચે વહેવા દે છે.


 આ સોલ્ડરિંગ ટૂલ ઇન્સ્યુલેટેડ હેન્ડલ અને ગરમ પોઇન્ટેડ મેટલ આયર્ન ટીપથી બનેલું છે. સોલ્ડરિંગ   આયર્નનો એન્જિનિયરિંગ ઉપયોગ હોવા છતાં, તેનો ઉપયોગ વિવિધ જોડાણોમાં થઈ શકે છે.


2. Soldering Station

If you are going to do a lot of soldering, this is great because they provide more flexibility and control. The main advantage of a soldering station is the ability to adjust the soldering iron temperature properly which is great.

સોલ્ડરિંગ સ્ટેશન

જો તમે ઘણી સોલ્ડરિંગ કરવા જઇ રહ્યા છો, તો અત્યંત સરળ છે કારણ કે તેઓ વધુ સુગમતા અને નિયંત્રણ પ્રદાન કરે છે. સોલ્ડરિંગ સ્ટેશનનો મુખ્ય ફાયદો સોલ્ડરિંગ આયર્નના તાપમાનને યોગ્ય રીતે વ્યવસ્થિત કરવાની ક્ષમતા છે જે મહાન છે.

 


These stations can also create a safe workplace as some also include advanced temperature sensors, warning settings, and password protection for security.

સ્ટેશનો સલામત કાર્યસ્થળ પણ બનાવી શકે છે કારણ કે કેટલાકમાં અદ્યતન તાપમાન સેન્સર, ચેતવણી સેટિંગ્સ અને સુરક્ષા માટે પાસવર્ડ સુરક્ષા શામેલ છે.


3. Soldering Iron Tip

Most soldering iron endings have an interchangeable part known as a soldering tip. This tip has many forms and they come in a variety of shapes and sizes. Each tip is used for a specific purpose and provides a distinct advantage over the other.

સોલ્ડરિંગ આયર્ન ટીપ

મોટાભાગના સોલ્ડરિંગ આયર્ન એન્ડિંગ્સમાં વિનિમયક્ષમ ભાગ હોય છે જેને સોલ્ડરિંગ ટીપ તરીકે ઓળખવામાં આવે છે ટીપના ઘણા સ્વરૂપો છે અને તે વિવિધ આકારો અને કદમાં આવે છેદરેક ટીપનો ઉપયોગ ચોક્કસ હેતુ માટે કરવામાં આવે છે અને તે અન્ય પર એક અલગ ફાયદો પૂરો પાડે છે.



The most common tips you use in electronics projects are:

ઇલેક્ટ્રોનિક્સ પ્રોજેક્ટ્સમાં તમે ઉપયોગ કરો છો તે સૌથી સામાન્ય ટીપ્સ છે:

Conical tip  (શંકુ આકાર ટીપ)

Chisel tip.  (છીણી ટીપ.)


4. Conventional Sponge

પરંપરાગત સ્પોન્જ

Solders use a sponge, it will help to clean the soldering iron tip which removes oxidation. With oxidation, the tips will turn black and will not accept solder as it was new. You can use a conventional wet sponge, but this shortens the tip’s lifetime due to increase and decrease.

સોલ્ડર સ્પોન્જનો ઉપયોગ કરે છેતે સોલ્ડરિંગ આયર્ન ટીપને સાફ કરવામાં મદદ કરશે જે ઓક્સિડેશનને દૂર કરે છેઓક્સિડેશન સાથેટીપ્સ કાળી થઈ જશે અને સોલ્ડર સ્વીકારશે નહીં કારણ કે તે નવી હતીતમે પરંપરાગત ભીના સ્પોન્જનો ઉપયોગ કરી શકો છોપરંતુ  વધારો અને ઘટાડાને કારણે ટીપનું જીવન ટૂંકું કરે છે.


In addition, the tip temperature will drop temporarily when the wet sponge is wiped. So it is better to use a brass sponge.

વધુમાં, જ્યારે ભીનું સ્પોન્જ નીંદણ હોય ત્યારે ટીપનું તાપમાન અસ્થાયી ધોરણે ઘટશે. તેથી પિત્તળના સ્પોન્જનો ઉપયોગ કરવો વધુ સારું છે.


5. Soldering Iron Stand

સોલ્ડરિંગ આયર્ન સ્ટેન્ડ

A soldering iron stand is very basic but very useful to use in soldering operations. This stand stops the hot iron tip from coming into contact with flammable materials or causes accidental injury to your hand.
                                 


સોલ્ડરિંગ આયર્ન સ્ટેન્ડ ખૂબ મૂળભૂત છે પરંતુ સોલ્ડરિંગ કામગીરીમાં વાપરવા માટે ખૂબ ઉપયોગી છે. સ્ટેન્ડ ગરમ લોખંડની ટીપને જ્વલનશીલ પદાર્થોના સંપર્કમાં આવતા અટકાવે છે જેના કારણે તમારા હાથમાં આકસ્મિક ઈજા થાય છે.


6. Solder

Solder is a metal alloy material that is melted to form a permanent bond between electrical parts. Inside the core, there is a substance known as a flux that helps improve electrical contact and its mechanical strength.

સોલ્ડર

સોલ્ડર  મેટલ એલોય સામગ્રી છે જે ઓગળવામાં આવે છે જે વિદ્યુત ભાગો વચ્ચે કાયમી બંધન બનાવે છેકોરની અંદરપ્રવાહ તરીકે ઓળખાતું પદાર્થ છે જે વિદ્યુત સંપર્ક અને તેની યાંત્રિક શક્તિને સુધારવામાં મદદ કરે છે.


The most commonly used type is lead-free Rossin core solder for electronic soldering.

સૌથી વધુ ઉપયોગમાં લેવાતો પ્રકાર ઇલેક્ટ્રોનિક સોલ્ડરિંગ માટે લીડ-ફ્રી રોસીન કોર સોલ્ડર છે.


7. Helping Hand

It is a device consisting of 2 or more clips and sometimes a magnifying glass/light is attached. The clips will help you to hold the things that you are trying to solder while using the soldering iron and solder. It is known as a very helping tool in soldering operation.


                                              

હેલ્પિંગ હેન્ડ

તે
એક ઉપકરણ છે જેમાં 2 અથવા વધુ ક્લિપ્સ હોય છે અને કેટલીકવાર બૃહદદર્શક કાચ/પ્રકાશ જોડાયેલ હોય છે. ક્લિપ્સ તમને સોલ્ડરિંગ આયર્ન અને સોલ્ડરનો ઉપયોગ કરતી વખતે જે વસ્તુઓ તમે સોલ્ડર કરવાનો પ્રયાસ કરી રહ્યા છો તેને પકડી રાખવામાં મદદ કરશે. તે સોલ્ડરિંગ કામગીરીમાં ખૂબ મદદરૂપ સાધન તરીકે ઓળખાય છે.

Popular Posts