Practical-69 :- Practice TCP/IP Utilities : PING, IP CONFING, HOSTNAME, ROUTE, TRACERT Etc.



Tracert

This command is used to diagnose path-related problems. On an IP network, routers exchange IP packets between the source and the destination. They take IP packets from the source host and forward them in a sequence until they reach the destination host. The sequence of routers between the source and destination is known as the path. A path consists of all routers in a sequence that IP packets sent from the source host traverse to reach the destination host.

The tracert command prints the path. If all routers on the path are functional, this command prints the full path. If a router is down on the path, this command prints the path up to the last operational router.


 


























Comments

Post a Comment

If you have any doubts, please let me know

Popular posts from this blog

ENGLISH MCQ TEST FROM 1-75 WORDS

English Vocabulary MCQ Test (1-75) Vocabulary Test (1-75) Please enter your name to begin the test. Start Quiz English Vocabulary Test Answered: 0 /50 Submit Test Please answer at least 25 questions to submit. Test Result Correct Answers Questions A...
Read more

English MCQs (Words 76-135)

English Vocabulary MCQ Test (76-135) Vocabulary Test (76-135) Please enter your name to begin the test. Start Quiz English Vocabulary Test Answered: 0 /50 Submit Test Please answer at least 25 questions to submit. Test Result Correct Answers Questions A...
Read more

Experiment - 29 :- To identifying the status of a UPS (Uninterruptible Power Supply) from its front panel indicators

Image
AIM :- To identifying the status of a UPS (Uninterruptible Power Supply) from its front panel  indicators, Materials Needed UPS unit with front panel indicators Load (e.g., computer, lamp, etc.) to connect to the UPS Multimeter (optional, for battery voltage testing) Procedure Initial Setup : Place the UPS in a well-ventilated area. Connect the UPS to a wall outlet. Connect a load (like a computer or lamp) to the UPS output. Powering On the UPS : Turn on the UPS. Observe the power on indicator: Expected Result : A solid green light indicates that the UPS is powered on. Observing Battery Status : After powering on, let the UPS charge for a few hours if necessary. Check the battery status indicator: Expected Result : A solid green light typically means the battery is fully charged. A yellow or red light indicates low charge. Simulating Power Failure : Unplug the UPS from the wall outlet while keeping the load connected. Observe the indicators: Expected Result : The UPS should switch ...
Read more